2022 Jaguar I-Pace Technical Specifications
TECHNICAL SPECIFICATIONS
Some technical specification information in the Owner’s Handbook is not available at the time of print, or is subject to updates after printing. Please visit the online Owner’s Handbook at: http://www.ownerinfo.jaguar.com, or contact a retailer/authorized repairer, for the latest data.
ELECTRIC MOTOR SPECIFICATIONS
Specification | All variants |
---|---|
Number of motors. | 2 |
Layout of motors. | One front and one rear. |
Electric motor type. | Permanent magnet synchronous motor. |
For further information, contact a retailer/authorized repairer and quote the Vehicle Identification Number (VIN). See LABEL LOCATIONS.
HIGH VOLTAGE BATTERY SPECIFICATIONS
Specification | All variants |
---|---|
Storage type. | Lithium Ion. |
Nominal Voltage. | 388 V |
Useable energy. | 84.7 kWh |
LUBRICANTS AND FLUIDS
Part | Specification |
---|---|
Brake fluid. | It is recommended to use Jaguar brake fluid. If unavailable, non-petroleum based brake fluid meeting specification DOT4 ISO 4925 Class 6 may be used. |
Washer fluid. | Screen wash with frost protection, diluted with clean water, as specified on the bottle. |
Coolant fluid. | Mixture of 50% water and 50% antifreeze meeting Jaguar Land Rover specification STJLR.651.5003. |
Air Conditioning (A/C) refrigerant. | R1234yf |
A/C compressor oil. | SP-A2 |
CAPACITIES
Item | Capacity, US pints (L) |
---|---|
Washer fluid reservoir. | 11.5 (5.5) |
Air Conditioning (A/C) refrigerant. | 1.9 lb (850 g) |
A/C compressor oil. | 6.8 oz (200 cc) |
The quoted capacities are approximate and provided as a guide only.
WEIGHTS
Variant | Curb weight lbs (kg) | Gross Vehicle Weight (GVW)¹ lbs (kg) | Maximum front axle load² lbs (kg) | Maximum rear axle load² lbs (kg) |
---|---|---|---|---|
All vehicles. | 4 784 (2 170) | 5 886 (2 670) | 2 910 (1 320) | 3 195 (1 449) |
¹The maximum permissible weight of the vehicle, inclusive of the driver and passengers, and the vehicle’s payload. The vehicle’s payload includes the luggage compartment weight, roof rack weight, and accessory equipment weight.
²The front and rear axle maximum weights cannot be reached simultaneously, as this will exceed the GVW limit.
Make sure that the luggage compartment weight does not exceed the maximum axle load or the GVW.
The maximum permitted roof weight, including the weight of the roof rack and roof bars, is 165 lbs (75 kg) for all models.
DIMENSIONS
Item | Description | Variant | Inches (mm) |
---|---|---|---|
1 | Width, including mirrors. | All vehicles. | 84.2 (2 139) |
2 | Width, without mirrors. | All vehicles. | 74.6 (1 895) |
3 | Track, front. | Vehicles with air suspension. | 64.7 (1 643) |
4 | Height, including roof antenna. | Vehicles with air suspension. | 61.3 (1 558) 61.1 (1 553), passive. |
5 | Track, rear. | Vehicles with air suspension. | 65.4 (1 662) |
6 | Wheelbase. | All vehicles. | 117.7 (2 990) |
7 | Length, excluding license plate plinth. | All vehicles. | 184.3 (4 682) |
8 | Maximum wading depth. The maximum wading speed is 4 mph (7 km/h). | All vehicles. | 19.7 (500) |
9 | Approach angle at mass 1. | Vehicles with air suspension. | 17.6° 17.1°, passive. |
10 | Ramp breakover angle at mass 1. | Vehicles with air suspension. | 13.0° 12.6°, passive. |
11 | Departure angle at mass 1. | Vehicles with air suspension. | 22.2° 21.8°, passive. |
Minimum turning circle (curb to curb). | All vehicles. | 39.3 ft (11.98 m) |
SMART KEY TRANSMITTER LOCATIONS
Any person fitted with an implanted medical device should be kept at a distance of at least 9 in (22 cm) away from any transmitter mounted in the vehicle. This is to avoid any possibility of interference between the system and the device.
- Front satellite anchor transceiver.
- Cabin front transmitter.
- Door transmitters.
- Keyless vehicle module.
- Rear satellite anchor transceiver.
- Luggage compartment rear transmitter.
RADIO FREQUENCY SPECTRUM REGULATION STATEMENTS
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada Standard IC – RSS-210: Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
The key system transmitter radio frequency approval numbers for the USA and Canada are shown below:
USA FCC ID: | KOBJBG18A |
KOBJTF18A | |
KOBJXF18A | |
KOBJXU18A | |
Canada IC: | KOBJBG18A |
KOBJTF18A | |
KOBJXF18A | |
KOBJXU18A |
The manufacturer is not responsible for any radio interference or TV interference caused by unauthorized modifications to this equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The Smart key may suffer interference from other legal users of this radio frequency band, such as radio amateurs, medical equipment, remote controls or alarm systems. To lock or unlock the vehicle in such a situation, either use a key or operate the key transmitter as close to the security antenna as possible.