The virtual instrument panel comprises a speedometer (1), a tachometer (2), and an information panel (3). The engine temperature (4) is displayed within the tachometer. The fuel level (5) is displayed within the speedometer. All instruments are only visible when the vehicle’s ignition is switched on. The virtual instrument panel can be configured to meet personal preferences. See CONFIGURING A VIRTUAL INSTRUMENT PANEL.
The virtual instrument panel can be configured using the steering wheel controls. See INSTRUMENT PANEL MENU OPERATION and INSTRUMENT PANEL MENU OPTIONS.
To configure the virtual instrument panel:
The following layout options are available:
The selected option is retained after the vehicle’s ignition is switched off.
Driving status information, e.g., the vehicle’s speed, is always displayed in the instrument panel, irrespective of the option selected.
The speedometer displays the current vehicle speed. Depending on market specifications, the speedometer can be configured to display in mph or km/h via the instrument panel. See INSTRUMENT PANEL MENU OPERATION.
To configure the speedometer:
The tachometer displays the current engine speed in revolutions per minute (rpm).
The information panel displays information and menu selection options. The information panel can be configured to meet personal preferences.
To configure the information panel:
The fuel gauge displays the current fuel tank level. An arrowhead symbol, next to the fuel pump symbol, indicates which side of the vehicle the fuel filler flap is located.
The low fuel warning lamp illuminates to indicate that the vehicle should be refueled in the near future.
The approximate driving distance for the current fuel level can be viewed via the trip computer. See TRIP COMPUTER.
Never allow the engine to run out of fuel. Doing so may cause serious damage to the vehicle’s fuel system.
The temperature gauge displays the current engine temperature.
If the pointer moves into the red segment, the engine is overheating. In this event, the engine temperature warning lamp illuminates.
If the engine overheats, stop the vehicle as soon as safety permits. Allow the engine to idle until the temperature reduces. If the temperature does not reduce after several minutes, switch the engine off and allow it to cool.
If the problem persists, seek qualified assistance immediately.
Serious engine damage occurs if the vehicle is driven while the engine is overheating.
Engine performance may be reduced, and some vehicle systems may stop working if the engine overheats.
Do not operate the instrument panel menu while the vehicle is moving. Doing so may cause driver distraction. Driver distraction may cause an accident, leading to serious injury or death.
The instrument panel’s display settings and some vehicle features can be configured using the instrument panel menu. The instrument panel menu is operated via the left-side steering wheel controls.
No menu items are displayed if a warning or information message is present in the information panel. Press the OK button to clear any messages, after any relevant action has been taken.
Do not operate the instrument panel menu while the vehicle is moving. Doing so may cause driver distraction. Driver distraction may cause an accident, leading to serious injury or death.
Instrument panel menus do not display until any messages are read and cleared. Do not ignore any warning or information messages displayed in the instrument panel. Take appropriate action as soon as possible. Failure to do so may result in serious damage to the vehicle, serious injury, or death. See WARNING AND INFORMATION MESSAGES.
The following main menu options are available:
The phone menu only displays when a smartphone is paired and connected.
Not all menu options are available in all markets.
Some menu options are not available once the engine is started.
The trip computer displays and stores trip information. Trip information is displayed in the information panel.
The following information can be displayed:
Press and release the trip button, located at the end of the lighting control, to scroll through the available options.
Some trip computer information can be reset to zero. Press and hold the trip button for 2 seconds, when the required information is displayed in the information panel.
Two trip computers are available: Trip A and Trip B. Both display the same information. To switch between the trip computers:
A third option, Trip Auto, is also available. Trip Auto allows the driver to add or remove data from either Trip A or Trip B, to a running total.
To add data for the last journey to Trip Auto:
The trip computer can be configured to display in miles or km via the instrument panel menu.
The next required service can be displayed via the instrument panel menu. See INSTRUMENT PANEL MENU OPERATION.
To view information on the next required service:
Dependent on the vehicle’s specification, different service info and messages are available as part of the flexible servicing strategy.
Dependent on the vehicle’s specification, other fluid intervals and capacities may also be displayed. The required service interval displays as a distance or time left until the next service are due. If the distance is exceeded, the display shows a negative (–) value to indicate that a service is overdue. Refer to a retailer/authorized repairer for details.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…