2022 Hyundai Tucson Ignition Switch
IGNITION SWITCH
WARNING
To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions:
- NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle movement can occur.
- NEVER reach through the steering wheel for the ignition switch, or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident.
Key ignition switch (if equipped)
- [A] : LOCK, [B] : ACC
- [C] : ON, [D] : START
Whenever the front door is opened, the ignition switch will illuminate, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition switch is turned on or go off after about 30 seconds when the door is closed. (if equipped)
WARNING
- NEVER turn the ignition switch to the LOCK or ACC position while the vehicle is in motion except in an emergency.
- This will result in the engine turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident.
- Before leaving the driver’s seat, always make sure the shift lever is in P (Park, for automatic transmission vehicle) position, apply the parking brake, and turn the ignition switch to the LOCK position.
- Unexpected vehicle movement may occur if these precautions are not followed.
NOTICE
Never use aftermarket keyhole covers. This may generate start-up failure due to communication failure.
Key ignition switch positions
| Switch Position | Action | Notes |
|
LOCK |
To turn the ignition switch to the LOCK position, push the key in at the ACC position and turn the key towards the LOCK position.
The ignition key can be removed in the LOCK position. The steering wheel locks to protect the vehicle from theft. (if equipped) |
|
|
ACC |
Some electrical accessories are usable. The steering wheel unlocks. | If the difficulty is experienced turning the ignition switch to the ACC position, turn the key while turning the steering wheel right and left to release. |
|
ON |
This is the normal key position when the engine has started. All features and accessories are usable.
The warning lights can be checked when you turn the ignition switch from ACC to ON. |
Do not leave the ignition switch in the ON position when the engine is not running to prevent the battery from discharging. |
|
START |
To start the engine, turn the ignition switch to the START position. The switch returns to the ON position when you let go of the key. | The engine will crank until you release the key. |
Starting the engine
WARNING
- Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brake, accelerator and clutch pedals.
- Do not start the vehicle with the accelerator pedal depressed. The vehicle can move which can lead to an accident.
- Wait until the engine RPM is normal. The vehicle may suddenly move if the brake pedal is released when the RPM is high.
- Make sure the Electronic Parking Brake (EPB) is applied.
- Make sure the shift lever/button is in P (Park).
- Depress the brake pedal.
- Turn the ignition switch to the START position. Hold the key (maximum of 10 seconds) until the engine starts and release it.
Information
- Do not wait for the engine to warm up while the vehicle remains stationary. Start driving at moderate engine speeds. (Steep accelerating and decelerating should be avoided.)
- Always start the vehicle with your foot on the brake pedal. Do not depress the accelerator while starting the vehicle. Do not race the engine while warming it up.
NOTICE
To prevent damage to the vehicle:
- Do not hold the ignition key in the START position for more than 10 seconds. Wait 5 to 10 seconds before trying again.
- Do not turn the ignition switch to the START position with the engine running. It may damage the starter.
- If traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and turn the ignition switch to the START position in an attempt to restart the engine.
- Do not push or tow your vehicle to start the engine.