2023 Ford E350-Series Refueling User Manual

Ford_logo

2023 Ford E350-Series Refueling

2023 Ford E- product img

REFUELING

  • WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries.
  • WARNING: Read and follow all the instructions on the pump island.
  • WARNING: When refueling always shut the engine off and never allow sparks or open flames near the fuel tank filler valve. Never smoke or use a cell phone while refueling. Fuel vapor is extremely hazardous under certain conditions. Avoid inhaling excess fumes.
  • WARNING: Stay outside your vehicle and do not leave the fuel pump unattended when refueling your vehicle.
  • WARNING: Keep children away from the fuel pump. Never let children pump fuel.
  • WARNING: Wait at least five seconds before removing the fuel pump nozzle to allow any residual fuel to drain into the fuel tank.
  • WARNING: Stop refueling after the fuel pump nozzle automatically shuts off for the second time. Failure to follow this will fill the expansion space in the fuel tank and could lead to fuel overflowing.
  • WARNING: Do not remove the fuel pump nozzle from its fully inserted position when refueling

Use the following guidelines to avoid electrostatic charge build-up when filling an ungrounded fuel container:

  • Place approved fuel container on the ground.
  • Do not fill a fuel container while it is in the vehicle (including the cargo area).
  • Keep the fuel pump nozzle in contact with the fuel container while filling.
  • Do not use a device that would hold the fuel pump handle in the fill position.

Fuel Filler Cap

WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury.

Note: If you must replace the fuel filler cap, replace it with a fuel filler cap that is designed for your vehicle. The customer warranty may be void for any damage to the fuel tank or fuel system if the correct genuine Ford, Motorcraft or other certified fuel filler cap is not used.

Your vehicle has a threaded fuel filler cap. When fueling your vehicle:

  1. Put your vehicle in park (P).
  2. Switch the engine off.
  3. Carefully turn the filler cap counterclockwise until it spins off.
  4. Pull to remove the cap from the fuel filler pipe and place on the fuel door hanging hook if equipped.
  5. To install the fuel filler cap, hold the cap by the cover handle and place the threaded end of the cap into filler pipe. Turn the cap clockwise until it clicks at least once.

If the Check Fuel Cap light or a Check Fuel Cap message appears in the instrument cluster and stays on after you start the engine, you may not have installed the fuel filler properly.

If the fuel cap light remains on, at the next opportunity, safely pull off of the road, remove the fuel filler cap, align the cap properly and reinstall it. The check fuel cap light or Check fuel cap message may not reset immediately. It may take several driving cycles for the indicators to turn off.
A driving cycle consists of an engine start-up (after four or more hours with the engine off) followed by normal city and highway driving.

Leave a Comment