2023 Ford E-350 Lane Keeping System User Manual

2023 Ford E-350 Lane Keeping System

LANE-KEEPING SYSTEM (IF EQUIPPED)

• WARNING: You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility t drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury, or death.
• WARNING: Always drive with due  care and attention when using and operating the controls and features on your vehicle.
• WARNING: In cold and severe weather conditions the system may not function. Rain, snow, and spray can all limit sensor performance.
• WARNING: The system will not operate if the sensor cannot track the road lane markings.
• WARNING: The sensor may incorrectly track lane markings as other structures or objects. This can result in a false or missed warning.
• WARNING: Large contrasts in outside lighting can limit sensor performance.
• WARNING: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction.
• WARNING: If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible.
• WARNING: The system may not correctly operate if your vehicle is fitted with a suspension kit not approved by us.

Note: The system works as long as the camera can detect one lane marking at a speed above 40 mph (64 km/h).
Note: The system may not function with a blocked camera, or if the windshield is damaged or dirty.

Switching the System On and Off

System Settings

• The system sensitivity and intensity can be adjusted through the display screen. See General Information (page 65). The system remembers the last selection. You do not need to readjust the setting each time you turn on your vehicle.
• Sensitivity: This setting allows you to select where in the lane a warning is provided. Increasing the sensitivity setting moves the warning zones in closer to your vehicle.
  • A Normal
  • B Increased

Note: The alert diagram illustrates general zone coverage. It does not provide exact zone parameters.

System Display

When you switch on the system, a graphic with lane markings appears in the display screen.

Note

• The overhead vehicle graphic may still display if adaptive cruise control is enabled.
• While the system is on, the color of the lane markings changes to indicate the system status.

Gray: Indicates that the system is temporarily unable to provide a warning on the indicated side(s). This may be because:

• Your vehicle is below the activation speed.
• The direction indicator is active.
• Your vehicle is in a dynamic maneuver.
• The road has no or poor lane markings in the camera field of view.
• The camera is obscured or unable to detect the lane markings due to environmental, traffic or vehicle conditions. For example, significant sun angles, shadows, snow, heavy rain or fog, following a large vehicle that is blocking or shadowing the lane or poor headlamp illumination.

See Troubleshooting for additional information.

Green: Indicates that the system is available or ready to provide a warning on the indicated side(s).
Red: Indicates that the system is providing or has just provided a lane keeping alert warning.
You can temporarily disable the system at any time by doing the following:

• Quick braking.
• Fast acceleration.
• Using your direction indicator.
• Evasive steering maneuver.
• Driving too close to the lane markings

Troubleshooting