Skip to content
2023 Ford E-350 Hints on Controlling the Interior Climate
HINTS ON CONTROLLING THE INTERIOR CLIMATE
General Hints
- Note: Prolonged use of recirculated air may cause the windows to fog up.
- Note: You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
- Note: To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
- Note: To reduce fogging of the windshield during humid weather, adjust the air distribution control to the windshield air vent position.
- Note: Do not place objects under the front seats as this may interfere with the airflow to the rear seats.
- Note: Remove any snow, ice or leaves from the air intake area at the base of the windshield.
- Note: To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.
Quickly Heating the Interior
- Adjust the fan speed to the highest speed setting.
- Adjust the temperature control to the full heat setting.
- Direct air to the footwell air vents.
Recommended Settings for Heating
- Adjust the fan speed to the center setting.
- Adjust the temperature control to the midway point of the hot settings.
- Direct air to the footwell air vents
Quickly Cooling the Interior
- Switch MAX A/C on.
- Drive with the windows open until you feel cold air through the air vents.
Recommended Settings for Cooling
- Adjust the fan speed to the center setting.
- Adjust the temperature control to the midway point of the cold settings.
- Direct air to the instrument panel air vents.
Vehicle Stationery for Extended Periods During Extreme High Ambient Temperatures
- Apply the parking brake.
- Place your vehicle in park (P) or neutral (N).
- Switch MAX A/C on.
- Adjust the fan speed to the lowest speed setting.
Defogging the Side Windows in Cold Weather
- Direct air to the instrument panel and windshield vents.
- Turn to NORM A/C.
- Adjust the temperature control to the desired setting.
- Adjust the fan speed to the highest setting.
- Direct air toward the side windows.
- Close the instrument panel vents