Silverado

2022 Chevrolet Silverado 1500 Bulb Replacement User Manual

2022 Chevrolet Silverado 1500 Bulb Replacement

Bulb Replacement

For the proper type of replacement bulbs, or any bulb changing procedure not listed in this section, contact your dealer.

Caution

Do not replace incandescent bulbs with aftermarket LED replacement bulbs. This can cause damage to the vehicle’s electrical system.

Halogen Bulbs

Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.

LED Lighting

This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer

Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps

Base Level Headlamp Assembly

  • Sidemarker lamp
  • Low-Beam Headlamp
  • High-Beam Headlamp
  • Turn Signal/Park Lamps

Headlamp Replacement

Base Level

  1. Open the hood.
  2. Remove the headlamp bulb cover.
  3. Turn the bulb socket counterclockwise to remove it from the headlamp assembly.
  4. Unplug the electrical connector from the bulb by releasing the clip on the connector.
  5. Replace the bulb and reverse Steps 1–4 to reinstall.

Midlevel and Uplevel

See your dealer for headlamp replacement.

Turn Signal Lamp Replacement

See your dealer for turn signal replacement.

Taillamps, Turn Signal, Stop lamps, and Back-Up Lamps

Base Level Taillamp Assembly

  1. Stoplamp/Taillamp/Turn Signal Lamp
  2. Back-Up Lamp
  3. Side Marker Lamp

Uplevel Taillamp Assembly

  1. Back-Up Lamp

It is recommended to replace the grommets when replacing a bulb. See your dealer.

To replace one of these bulbs:

  1. Open the tailgate.
  2. Remove the two rear lamp assembly screws.
  3. Pull the rear lamp assembly outward and rearward away from the box side to remove it from the vehicle
  4. Turn the bulb socket counterclockwise.
  5. Pull the bulb straight out from the socket.
  6. Replace the bulb and reverse Steps 1–5 to reinstall.

Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp

This procedure is for the regular cab only. For crew cab and double cab see your dealer.

  1. Cargo Lamp Bulbs
  2. Center High-Mounted Stoplamp (CHMSL) Bulb

To replace one of these bulbs

  1. Remove the two screws and lift off the lamp assembly.
  2. Turn the bulb socket counterclockwise and pull it straight out.
  3. Pull the bulb straight out from the socket.

License Plate Lamp To replace the bulb

  1. Reach behind the rear bumper and locate the bulb.
  2. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket
  3. Replace the bulb and reverse Step 2 to reinstall.
Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

7 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

7 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago