Vehicle fuse box diagrams, images, and videos.
2022 Kawasaki KX112 Drive Chain Drive Chain For safety and to prevent excessive wear, the drive chain must be checked, adjusted, and lubricated in accordance with the Periodic Maintenance Chart. If the chain becomes badly worn or maladjusted either too loose or too tight – it could jump off the sprockets or break. WARNING A … Read more
2022 Kawasaki KX112 Ignition Timing Ignition Timing Since this motorcycle is equipped with a capacitor discharge ignition (CDI) system, the ignition timing should never require adjustment unless the stator was incorrectly installed during engine reassembly. If there is any doubt as to the timing, inspect and, if necessary, adjust it as follows. Free the carburetor … Read more
2022 Kawasaki KX112 Throttle Cable Throttle Cable Throttle Cable Adjustment Inspect the throttle grip for smooth operation in all steering positions. Check and adjust the throttle cable in accordance with the Periodic Maintenance Chart. Check that the throttle grip has 2 3 mm (0.08 0.12 in.) of play and turns smoothly. A. Throttle Grip B. … Read more
2022 Kawasaki KX112 Adjustable Ergonomics Adjustable Ergonomics Handlebar Removal Unlock the clamp of the number plate (see Steering section). Remove the handlebar holder bolts, the handlebar holders, and the handlebars. A. Handlebars B. Handlebar Holders C. Handlebar Holder Bolts Check the handlebars for bent or cracked. Handlebar Installation Apply 2-stroke oil to the thread of … Read more
2022 Kawasaki KX112 Brakes Brakes Disc and disc pad wear is automatically compen- sated for and has no effect on the brake lever or pedal action. There are no parts on the brakes that require adjustment except brake lever position. Brake Lever Position Adjustment The brake lever position can be adjusted to suit the rider’s … Read more
2022 Kawasaki KX112 Steering Steering The steering should always be kept adjusted so that the handlebars will turn freely but not have excessive play. Steering Inspection To check the steering adjustment, raise the front wheel off the ground using a jack (special tool: 57001-1238) and attachment (special tool: 57001-1608) Push the handlebars lightly to either … Read more
2022 Kawasaki KX112 Front Suspension Front Suspension Front Fork Inspection NOTICE Sticking muds or dusts on the sliding surface of the front fork could damage the oil seal,leading to an oil leak. Clean the sliding sur face after each ride. Holding the brake lever, pump the front fork back and forth manually to check for … Read more
2022 Kawasaki KX112 Rear Suspension (UNI-TRAK®) Rear Suspension (UNI-TRAK®) This motorcycle’s rear suspension system is called UNI-TRAK and consists of a rear shock absorber unit, a swingarm, two lever rods and a lever. The operating characteristics of the UNI-TRAK suspension are similar to those of the front fork. However, a linkage system is used to … Read more
2022 Kawasaki KX112 Wheels Wheels Tire Air Pressure Tire air pressure affects traction, handling, and tire life. Adjust the tire air pressure to suit track conditions and rider preference, but keep it close within the recommended range. To check the tire air pressure, remove the air valve cap, and make sure to tighten the cap … Read more
2022 Kawasaki KX112 Tightening Torques of Nuts and Bolts Tightening Torques of Nuts and Bolts Location of nuts and bolts Before the first ride of each day of operation, check the tightness of the nuts and bolts shown below. Check also that all cotter pins are in place and in good condition. Front Fork Clamp … Read more