2022 Kawasaki VERSYS 1000 SE LT+ Grip Heater
Grip Heater
WARNING
- Operating the grip heater switch while riding may cause a distraction that can lead to a crash resulting in serious in- jury or death. Do not operate the grip heater switch while riding.
- Always wear gloves when using the grip heater to avoid burning hands.
- Using the grip heater with worn or damaged grips may cause burns. If the handlebar grip becomes worn or damaged, stop using the grip heater and replace the grip with a new one.
This motorcycle is equipped with temperature-adjustable grip heaters designed to heat the handlebar grips.
To operate the grip heater
Push the grip heater switch as shown to switch on and off or change the temperature.
A. Grip Heater Switch
B. Indicator
Check the grip heater operating condition and temperature setting level with the indicator.
The grip heater switch turns off when the ignition switch is turned off.
NOTE
- When the ignition switch is turned on, the indicator blinks when the battery voltage is low. Charge or replace the battery. Still blinking, there is a possibility that the grip heater may be broken, so replace the grip heater.
- If the battery voltage drops while using the grip heater, the grip heater turns off and the indicator blinks. The indicator will continue blinking even if the battery voltage recovers at high-speed driving etc. When using the grip heater, push the switch and turn off the grip heater once before using it. If the battery voltage is recovered, the grip heater can be turned on.
- The grip temperature is proportional to the outside air temperature. Avoid using it at a higher temperature setting on warmer days.
NOTICE
- Do not use the grip heaters for extended periods while the engine is stopped or idling to prevent draining the battery.
- Do not use a high-pressure washer to clean the motorcycle and avoid spraying the grips to prevent damage to wiring and heating elements.
- If the grip heater does not work properly, have the grip heater checked by an authorized Kawasaki dealer.