2022 Kawasaki VERSYS 1000 SE LT+ Specifications
Specifications
PERFORMANCE
Minimum Turning Radius 3.0 m (9.8 ft)
DIMENSIONS
- Overall Length 2 270 mm (89.37 in.)
- Overall Width 950 mm (37.4 in.)
- Overall Height/High Position 1 490 mm (58.66 in.)/1 530 mm (60.24 in.)
- Wheelbase 1 520 mm (59.84 in.)
- Road Clearance 150 mm (5.91 in.)
- Curb Mass 257 kg (567 lb) (CAL) 258 kg (569 lb)
ENGINE
- Type DOHC, 4-cylinder, 4-stroke, liquid-cooled
- Displacement 1 043 cm3 (63.64 cu in.)
- Bore x Stroke 77.0 x 56.0 mm (3.03 x 2.20 in.)
- Compression Ratio 10.3:1
- Starting System Electric starter
- Cylinder Numbering Method Left to right, 1-2-3-4
- Firing Order 1-2-4-3
- Fuel System Fl (Fuel Injection)
- Ignition System Battery and coil (transistorized ignition)
- Ignition Timing (Electronically advanæd) 100 BTDC 100 rimin (rpm) 420 BTDC OOO r/min (rpm)
- Spark Plug:
- Type NGK CR9ElA-9
- Gap 0.8 0.9 mm (0.031 0.035 in.)
- Lubrication System Forced lubrication (wet sump)
- Engine Oil:
- Type API SG, SH, SJ, SL or SM with JASO MA, MAI or MA2
- Viscosity SAE IOW-40
- Capacity 4.0 L (4.2 US qt)
- Coolant Capacity 2.6 L (2.7 US qt)
TRANSMISSION
- Transmission Type 6-speed, constant mesh, return shift
- Clutch Type Wet, multi disc
- Driving System Chain drive
- Primary Reduction Ratio 1.627 (83/51)
- Final Reduction Ratio 2.867 (43/15)
- Overall Drive Ratio 4.471 (Top gear)
- Gear Ratio:
- 1st 2.692 (35/13)
- 2nd 1.950 (39/20)
- 3rd 1.529 (26/17)
- 4th 1.304 (30/23)
- 5th 0.958 (23/24)
FRAME
- Caster 27.00
- Trail 106 mm (4.17 in.)
- Tire Size:
- Front 120/70ZR17 MIC (58W)
- Rear180/55ZR17 WC (73W)
- Rim Size:
- Front17M/C x MT3.50
- Rear 17M/C x MT5.50
- Fuel Tank Capacity 21 L (5.5 US gal)
- Brake Fluid:
- Front DOT4
- Rear DOT4
ELECTRICAL EQUIPMENT
- Battery 12 V 8 Ah (10 HR)
- Headlight:
- High Beam LED
- Low Beam LED
- City Light LED
- Cornering Light LED
- Brake/Tail Light LED
- Turn Signal Light 12 V 10 W (WYIOW)
- License Plate Light LED
Even if any one element of LED (Light Emitting Diode) light does not go on, consult with an authorized Kawasaki dealer.
Brake/TaiI Light
The brake/tail light goes on as below.
A. When the ignition switch is turned on.
B. When the brakes are applied.
When the ignition switch is turned on, some LED does not go on, however, it is normal. Specifications are subject to change without notice.