2022 Subaru Outback Engine Hood User Manual

Subaru logo

2022 Subaru Outback Engine Hood

2022 Subaru Outback productEngine Hood

CAUTION

  • Be extremely careful not to catch fingers or other objects when closing the engine hood.
  • Do not push the hood forcibly to close it. It could deform the metal.
  • Be extremely careful opening the engine hood when the wind is strong. The engine hood could close suddenly, possibly causing injuries from slamming.
  • Do not install accessories other than genuine SUBARU parts to the engine hood. If the engine hood becomes too heavy, the stay may not be able to support holding it open.
  • Check that the end of the hood stay is inserted into the slot. If it is not inserted properly, the hood may drop and cause injury.

To open the hood

  1. If the wiper blades are lifted off the windshield, return them to their original positions2022 Subaru Outback Engine Hood FIG 8
  2. Pull the hood release knob under the instrument panel.2022 Subaru Outback Engine Hood FIG 9
  3. Release the secondary hood lock by moving the lever between the front grille and the hood toward the left.2022 Subaru Outback Engine Hood FIG 10
  4. Lift up the hood, release the hood prop from its retainer, and put the end of the hood prop into the slot in the engine compartment

To close the hood

  1. Lift the hood slightly and remove the hood prop from the slot in the engine compartment and return the prop to its retainer.
  2. Lower the hood to a height of approximately 5.9 in (15 cm) above its closed position and then let it drop.
  3. After closing the hood, be sure the hood is securely locked. If this does not close the hood, release it from a slightly higher position.

WARNING
Always check that the hood is properly locked before you start driving. If it is not, it might fly open while the vehicle is moving and block your view, which may cause an accident and serious bodily injury.

Leave a Comment