2023 Volvo XC40 Recharge Plug-in Hybrid Rearview mirrors
HomeLink®
HomeLink® is a programmable remote control integrated into the car’s electrical system.
It can control up to three different devices remotely, e.g. a garage door opener or alarm system, and hence replace the remote controls for these.
The figure is schematic – the version may vary.
- Programmable buttons
- Indicator lamp
HomeLink® is built into the interior rearview mirror and consists of three programmable buttons and one indicator lamp in the mirror glass.
- Save the original remote controls for future reprogramming (e.g. when changing to another car or for use in another vehicle).
- It is also recommended that the programming for the buttons should be deleted when the car is sold.
Rearview and door mirrors
The rearview mirrors and door mirrors can be used to give the driver better visibility to the rear.
- The interior rearview mirror is equipped with HomeLink, automatic dimming and compass.
- The interior rearview mirror is adjusted by angling it manually.
Door mirrors
- Both mirrors are bent to provide optimal vision. Objects may appear to be further away than they actually are.
- The door mirror positions are adjusted with the joystick in the driver’s door control panel.
- There are also a number of automatic settings that can be linked to the memory function buttons for the power seat.
Angling adjustment of the door mirrors
- To ensure better visibility to the rear, the door mirrors need to be set to the preferences of the driver.
- There are a number of automatic settings that can also be linked to the memory function buttons for the power seat.
Controls for door mirrors.
- The door mirror positions are adjusted with the joystick in the driver’s door control panel. Ignition position must be at least I.
- Press the L button for the left-hand door mirror or the R button for the right-hand door mirror. The light in the button illuminates.
- Adjust the position with the joystick in the centre.
- Press the L or R button again. The light should no longer be illuminated.
- Depress the L and R buttons simultaneously.
- Release them after approximately 1 second. The mirrors automatically stop in the fully retracted position.
Fold out the mirrors by pressing down the L and R buttons simultaneously. The mirrors automatically stop in the extended position with the previous setting.
- Fold in the door mirrors by pressing down the L and R buttons simultaneously.
- Fold them out again by pressing the L and R buttons simultaneously.
- Repeat the above procedure as necessary.
The mirrors are returned to their original position.
- A door mirror can be angled down for the driver to view the side of the road when parking, for example.
- Engage reverse gear and press the L or R button.
Note
that the button needs to be pressed twice. The button flashes when the door mirror is angled down. When reverse gear is engaged, the door mirror automatically returns to its original position.
- Tap on Settings in the centre display’s top view.
- Press .
- Under Exterior Mirror Tilt at Reverse, select Off, Driver, Passenger or Both to activate/deactivate and to select which review mirror should be angled.
You can make the door mirror return to its original position by pressing the L or R button twice.
- Tap on Settings in the centre display’s top view.
- Press .
- Select Fold Mirror When Locked to activate/deactivate.
Adjusting rearview mirror dimming
Bright light from behind could be reflected in the rearview mirrors and dazzle the driver. Use dimming when disturbed by light from behind.
- Control for manual dimming.
Use dimming by moving the control in towards the passenger compartment.
Return to normal mode by moving the control towards the windscreen.
The control for manual dimming is not available on mirrors with automatic dimming.
Dimming sensitivity will affect both the interior rearview mirror and the door mirrors.
To change dimming sensitivity:
- Press Settings in the top view in the centre display.
- Press .
- Under Rearview Mirror Auto Dimming, select Normal, Dark or Light.
Dimming is adjusted automatically using light sensors in the interior rearview mirror.
For the door mirrors to be equipped with automatic dimming, the interior rearview mirror must also be equipped with automatic dimming.
Using a stored position for seat and door mirrors
If the positions for the power seat and the door mirrors have been stored, they can be activated by using the memory buttons.
A stored setting can be used with the front door either open or closed:
- Hold one of the memory buttons 1 (2) or 2 (3) depressed until seat and door mirrors stop in the positions that are stored in the selected memory button.
- If the memory button is released, the movement of the seat and door mirrors will be stopped.
- Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.
Storing a position for seat and door mirrors
- You can store the position for power seat and door mirrors in the memory buttons.
- Store two different positions for the power seat and the door mirrors using the memory buttons. The buttons are located on the inside of one of the front doors or both.
- Button M for storing settings.
- Memory button.
- Memory button.
- Adjust seat and door mirrors to the desired position.
- Press and hold the M button depressed. The light indicator in the button illuminates.
- Within three seconds, press and hold the 1 or 2 button.
- When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
The seat or the door mirrors must be readjusted before a new memory can be set.
Activating and deactivating the heated rear window and door mirrors
The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.
Physical button in the centre console.
- Press the button.
Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.
Open climate view in the centre display by pressing the symbol in the middle of the climate row.
Press Rear.
Heated rear window and door mirrors are activated/deactivated and the button illuminates/extinguishes.
Activating and deactivating automatic starting of the heated rear window and door mirrors
The heated rear window and door mirrors are used to quickly remove mist and ice from the windows and mirrors.
It is possible to set whether automatic start of heated rear window and door mirrors should be activated/deactivated when the engine is started. With automatic start activated, heating will start when there is a risk of ice or misting on the windscreen/window. The heating switches off automatically when the windscreen/window is sufficiently warm and the ice or misting is gone.
- Press Settings in the top view in the centre display.
- Press Climate.
- Select Auto Rear Defroster to activate/deactivate automatic start of heated rear window and door mirrors.