2022 Chevrolet Silverado 1500 Bulb Replacement
Bulb Replacement
For the proper type of replacement bulbs, or any bulb changing procedure not listed in this section, contact your dealer.
Caution
Do not replace incandescent bulbs with aftermarket LED replacement bulbs. This can cause damage to the vehicle’s electrical system.
Halogen Bulbs
Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.
LED Lighting
This vehicle has several LED lamps. For replacement of any LED lighting assembly, contact your dealer
Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps
Base Level Headlamp Assembly
- Sidemarker lamp
- Low-Beam Headlamp
- High-Beam Headlamp
- Turn Signal/Park Lamps
Headlamp Replacement
Base Level
- Open the hood.
- Remove the headlamp bulb cover.
- Turn the bulb socket counterclockwise to remove it from the headlamp assembly.
- Unplug the electrical connector from the bulb by releasing the clip on the connector.
- Replace the bulb and reverse Steps 1–4 to reinstall.
Midlevel and Uplevel
See your dealer for headlamp replacement.
Turn Signal Lamp Replacement
See your dealer for turn signal replacement.
Taillamps, Turn Signal, Stop lamps, and Back-Up Lamps
Base Level Taillamp Assembly
- Stoplamp/Taillamp/Turn Signal Lamp
- Back-Up Lamp
- Side Marker Lamp
Uplevel Taillamp Assembly
- Back-Up Lamp
It is recommended to replace the grommets when replacing a bulb. See your dealer.
To replace one of these bulbs:
- Open the tailgate.
- Remove the two rear lamp assembly screws.
- Pull the rear lamp assembly outward and rearward away from the box side to remove it from the vehicle
- Turn the bulb socket counterclockwise.
- Pull the bulb straight out from the socket.
- Replace the bulb and reverse Steps 1–5 to reinstall.
Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp
This procedure is for the regular cab only. For crew cab and double cab see your dealer.
- Cargo Lamp Bulbs
- Center High-Mounted Stoplamp (CHMSL) Bulb
To replace one of these bulbs
- Remove the two screws and lift off the lamp assembly.
- Turn the bulb socket counterclockwise and pull it straight out.
- Pull the bulb straight out from the socket.
License Plate Lamp To replace the bulb
- Reach behind the rear bumper and locate the bulb.
- Turn the bulb socket counterclockwise and pull the bulb straight out of the socket
- Replace the bulb and reverse Step 2 to reinstall.