2022 Lucid Air FCC and FDA Compliance
FCC Certification
FCC Notes: Wireless Charger-JVIiS USA
FCC ID: 2AZX6-1LCID350001
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference top radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Notes:
- TPMS System- Continental Automotive GmbH
- FCC ID: KR5TIS-01
FCC Statements
FCC S 15,19 Labelling requirements
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC S 15.21 Information to User Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Notes: Universal Garage Door Opener Transmitter Gentex Corp.
FCC ID: NZLADHL5D
FCC (USA) and IC (Canada):
This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may be received , including interference that may cause undesired operation.
WARNING: The transmitter has been tested and complies with FCC and IC rules.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Notes: Long Range Radar – Automotive Distance Control Systems GmbH
FCC ID: OAYARS5B IC: 4135A-ARS5B Canada only:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions
Canada & US:
- Radiofrequency radiation exposure Information: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
US: FCC Notice
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- FCC Notes: Short Range Radar Model: SRR5-B – Automotive Distance Control Systems GmbH
- FCC ID: OAYSRR5B
Radiofrequency radiation exposure Information
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Notice
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Note: Bluetooth Vehicle Key, ACM Node BTLE/LF, ACM Node BTLE/LF/NFC Pektron Group
FCC ID: AQO013, AQOO12, AQ0011
US
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- FCC Notes: TCU Lucid USA, Inc.
- FCC ID: 2AxZJ-CTX0700
FCC Interference Statement
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. It this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
For products available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated witha minimum distance of 25cm between the radiator & your body.
NOTE:
- EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions, and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
- To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.
- Food and Drug Administration (FDA) Compliance Information
WARNING: DO NOT attempt to remove, access, or modify the LiDAR unit in this vehicle. The LiDAR unit is a ClassI laser device subject to regulation by the FDA. There are NO permitted service or maintenance procedures for your vehicle’s LiDAR. If you suspect that the LiDAR unit is not functioning properly, contact Lucid immediately for instructions.
Vehicle Patents
A list of Lucid Air patents can be found at www.lucidmotors.com/legal.