2022 Lucid Air Rear Seats
Rear Seat Folding
WARNING: Secure objects carried within the vehicle. In an impact or sudden maneuver, unsecured objects can cause death or serious injury.
The split rear seat allows you to fold forward all or part of the seat to increase the load-carrying area. Before folding down a seat, remove any items on the seat or in the rear footwell and adjust the rear head restraints to the lowest position. See Rear head restraints. The rear seat release handles are located in the trunk.
To fold down a rear seat, pull the corresponding release handle.
NOTE: To fold down the complete rear seat, use both release handles.
After you feel the latch release, fold the seat forward from inside the passenger compartment.
Raising
To return the seat to its upright position, push it back until it locks in place. Make sure the seat back is locked in place by trying to pull the seat back forward.
WARNING: When the seat back is in its upright position, make sure the locking mechanism fully engages. If the locking mechanism does not fully engage, the risk of death and serious injury increases in an accident or heavy braking.
NOTE: When returning the seat to its upright position, make sure the seat belts are not trapped behind the backrest.
Rear Seat Pass-through
For your convenience when carrying long, narrow items, the rear seat has a pass-through hatch.
This hatch allows you to carry long items without having to fold the rear seat forward.
To open the pass-through hatch:
- Fold the rear seat armrest down.
- Pull down on the latch and fold the pass-through hatch panel forward onto the rear armrest.
To close the hatch, push the panel up until the latch engages.
CAUTION: When passing items through the hatch into the vehicle, make sure not to damage the upholstery on the seats and the armrests.
Rear Seat Heaters
All rear seating positions have seat heaters in the seat base and seat back except the rear center seatback, which only has a heater function in the seat base.
Control the seat heating in the Pilot Panel (select 
> REAR), the Rear Center Console Display (RCCD), or the capacitive buttons on either side of the RCCD.
Press the corresponding 
heat icon to heat the desired seat. You can heat the seats at three different levels.
- Press once to heat at the highest level. Three intensity indicators illuminate.
- Press twice to heat at the medium level. Two intensity indicators illuminate.
- Press a third time to heat at the lowest level. A single intensity indicator illuminates.
- Press a fourth time to turn off the seat heater.