2022 Polestar 2 Windshield and rear window
Activating and deactivating the heated rear window and door mirrors
Activating and deactivating the heated rear window and door mirrors from the center console: A button in the center console offers quick access to the heated rear window and door mirrors functions.
Button in center console.
- Tap the button.
> Heated windows and door mirrors are activated/deactivated and the button lights up/goes out.
Activating and deactivating the heated rear window and door mirrors from the center display
- Open Climate view in the center display by swiping upwards in Home view.
- Tap the button for heated rear window and door mirrors.
Heated windows and door mirrors are activated/deactivated and the button lights up/goes out.
Automatically activating and deactivating the heated rear window and door mirrors
- Open Climate view in the center display by swiping upwards in Home view.
- Tap Settings in the Climate view.
- Select desired setting under Auto rear defroster to activate/deactivate automatic rear window and power door mirror heating.
Using the rain sensor
The rain sensor monitors the amount of water on the windshield and automatically starts the windshield wipers. Rain sensor sensitivity can be adjusted using the thumb wheel on the right-hand steering wheel lever.
- Right-hand steering wheel lever.
- Rain sensor button
When the rain sensor is activated, the 
rain sensor symbol will be displayed in the instrument panel.
The rain sensor is automatically on or off when the vehicle is started depending on which mode it was in when the vehicle was switched off.
Activating the rain sensor: When the rain sensor is activated, the windshield wipers must be in 0 position or in the single-sweep position.
Activate the rain sensor by pressing the rain sensor button .
Move the lever downward for an extra wiper sweep.
Turn the thumb wheel upward for increased sensitivity and downward for decreased sensitivity. The wipers will make one extra sweep when the thumb wheel is turned upward.
Deactivate the rain sensor: Deactivate the rain sensor by pressing the rain sensor button or moving the lever upward to another wiper mode.
The rain sensor is automatically deactivated when the vehicle is switched off.
The rain sensor is also automatically deactivated when the wiper blades are put in the service position. The rain sensor will reactivate when service mode is switched off.
The windshield wipers may start inadvertently and be damaged in automatic car washes. Switch off the rain sensors before washing the vehicle. The symbol in the instrument panel will go out.
Using the windshield washers
Starting the windshield washers
Washing function, right-hand steering wheel lever.
- Move the right-side steering wheel lever toward the steering wheel to start the windshield washers.
> After the lever is released, the wipers make several extra sweeps.
Avoid activating the washer system when it is frozen or the fluid reservoir is empty. Otherwise, there is a risk of damaging the pump.
When there is approximately 1 liter (1 qt) of washer fluid remaining, the message Washer fluid Refill washer fluid, level low and the 
symbol will be displayed in the instrument panel.
Using the windshield wipers
- Right-hand steering wheel lever.
Single sweep
Move the lever down and release for a single sweep.
Wipers off
Move the lever to position 0 to turn off the windshield wipers.
Interval wipers
Move the lever upward to put the wipers in interval wiping mode. Set the number of sweeps per time unit with the thumb wheel when interval wipers are selected.
Continuous wipers
Move the lever upward for the wipers to operate at normal speed.
Move the lever upward again for the wipers to operate at high speed.
Before activating the wipers, make sure that the wiper blades are not frozen in place and that any snow or ice on the windshield has been scraped away.
Use plenty of washer fluid when the wipers clean the windshield. The windshield must be wet when the windshield wipers are working.
Wiper blades and washer fluid
The windshield washer nozzles are integrated into the upper side of the wiper arm. Washer fluid is supplied when washing is activated and the wiper arms begin moving.
The integrated washer nozzles in the wiper arm help provide more effective washing at different speeds and in different weather conditions, such as in strong winds. They can also help reduce the risk of impaired visibility for the driver, which is a common problem with traditional windshield washing methods. This type of integrated washing nozzle also provides more efficient washer fluid consumption.
The washer fluid nozzles* automatically heat up in cold weather to prevent the washer fluid from freezing.
When there is approximately 1 liter (1 qt) of washer fluid remaining, a message to refill will appear in the instrument panel.