2022 Polestar 2 Rearview and door mirrors
Activating and deactivating the heated rear window and door mirrors
A button in the center console offers quick access to the heated rear window and door mirrors functions.
Button in center console.
- Tap the button.
> Heated windows and door mirrors are activated/deactivated and the button lights up/goes out.
Activating and deactivating the heated rear window and door mirrors from the center display
- Open Climate view in the center display by swiping upwards in Home view.
- Tap the button for heated rear window and door mirrors.
Heated windows and door mirrors are activated/deactivated and the button lights up/goes out.
Adjusting the door mirrors
Door mirror controls
The joystick in the drivers’ door control panel is used to adjust the position of the door mirrors. The vehicle’s electrical system must be active.
- Press the L button for the left door mirror or R for the right door mirror. The button will light up.
- Adjust the position using the joystick located between the buttons.
- Press the L or R button again. The light in the button will go out.
Automatically folding door mirrors: The door mirrors can be automatically folded when driving or parking in tight spaces.
- Press the L and R buttons at the same time.
- Release the buttons after about 1 second. The mirrors will automatically stop when they are completely folded in.
Open the mirrors by pressing L and R at the same time. The mirrors will automatically stop when they reach the last-used setting.
Restoring to original position: A mirror that has been moved out of position manually (e.g. hit or bumped into) must be electrically returned to its original position for automatic folding to function properly.
- Fold in the mirrors by pressing the L and R buttons at the same time.
- Open them again by pressing the L and R buttons at the same time.
- Repeat the above procedure as needed.
The mirrors return to their original positions.
Tilting when parking: The door mirrors can be tilted down to help give the driver a better view along the sides of the vehicle, e.g. of the curb when parking.
- Select reverse gear and press the L or R mirror button.
Please note that the button may need to be pressed twice depending on settings. When the door mirror is tilted down, the light in the button will flash. When reverse gear is disengaged, the door mirrors automatically return to their original positions.
Automatically tilting when parking: With this setting, the door mirrors will automatically tilt down when reverse gear is engaged. The folded position is preset and cannot be adjusted.
- Tap
in the center display.
- Tap More.
- Tap Mirrors and select the desired setting.
To immediately return the door mirrors to their original position, press the L or R button twice.
Automatic folding when the vehicle is locked: The door mirrors fold in/out automatically when the vehicle is locked/unlocked using the key.
If you manually fold in the mirrors using the L and R buttons and then lock the vehicle, they will not fold out automatically when you unlock the vehicle, even if this preference has been set. Folding must then be done manually or while driving once the vehicle has reached a certain speed.
Adjusting the rearview mirror dimming function
Dimming is adjusted automatically, via light sensors in the rearview mirror, for both the rearview mirror and door mirrors.
- Tap in the center display.
- Tap More.
- Tap Mirrors and select the desired setting.
If the sensors are obstructed by e.g. a parking permit, transponder, sunshade or objects on the seats or parcel shelf in a way that prevents light from reaching the sensors, the auto-dim function in the rearview and door mirrors will be reduced.
Automatically activating and deactivating the heated rear window and door mirrors
Automatic start of heated rear window and door mirrors can be set to be activated/deactivated when the driver gets into the vehicle. With automatic start activated, heating will be turned on when there is a risk of ice or condensation on the windows or mirrors. Heating is automatically switched off when the window or door mirror is sufficiently warm and the condensation or ice is gone.
- Open Climate view in the center display by swiping upwards in Home view.
- Tap Settings in the Climate view.
- Select desired setting under Auto rear defroster to activate/deactivate automatic rear window and power door mirror heating.
HomeLink®
It can remotely control up to three different devices, such as garage door openers or alarm systems, and thereby replace the remote controls for these.
- Programmable buttons
- Indicator light
HomeLink® is integrated in the rearview mirror and consists of three programmable buttons and an indicator light in the mirror.
Save the original remote controls for future reprogramming (e.g. for use in another vehicle).
It is also advisable to delete the button programming if the vehicle is sold.
More information: Visit homelink.com or call 1-800-355-3515.
Rearview/door mirrors
Rearview mirror
The rearview mirror can be adjusted manually. The rearview mirror is equipped with HomeLink* and automatic dimming*.
Door mirrors
The power door mirrors have a wide-angle field in the outer edge of the mirrors to provide better visibility of objects in the vehicle’s blind spot.
The door mirror on the passenger side is curved to improve visibility. Objects in the mirror may appear farther away than they actually are.
The joystick in the drivers’ door control panel is used to adjust the position of the door mirrors. There are also several automatic settings that can also be connected to the memory function buttons for the power seat.
Storing seat and door mirror positions
Store two different positions for the power seat and the door mirrors using the memory buttons. The buttons are located on the inside of either one or both front doors.
- Button M for storing a setting.
- Memory button.
- Memory button.
Storing positions
- Adjust seat and door mirrors to the desired position.
- Press and hold the M button. The indicator light in the button will illuminate.
- Within three seconds, press and hold the 1 or 2 button.
> When the position has been stored in the memory button, an audio signal will sound and the indicator light in the M button will go out.
If none of the memory buttons are pressed within three seconds, the M button will go out and no position will be stored.
The seat or door mirrors must be readjusted before a new memory position can be set.
Using the stored seat and door mirror positions
Using a stored position
To use a stored position, press and hold one of the memory buttons 1 (2) or 2 (3) until the seat reaches the stored position.
Releasing the memory buttons will stop the movement of the seat and door mirrors.
- Because the driver’s seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
- The seat rails on the floor must not be obstructed in any way when the seat is in motion.