2023 Polestar 2 Blind Spot Information
Activating and deactivating BLIS*
Activate or deactivate the function using this button in the center display under Assist.
- Illuminated button indicator light – the function is activated.
- Extinguished button indicator light – the function is deactivated.
If BLIS is activated when the vehicle is started, the indicator lights in the door mirrors will flash once to confirm that the function is activated.
If BLIS is deactivated when the vehicle is switched off, it will remain switched off the next time the vehicle is started and no indicator lights will illuminate.
BLIS*
Location of BLIS indicator light
BLIS is a driver support system designed to alert the driver of:
- vehicles in your “blind spot”
- vehicles approaching rapidly in adjacent lanes.
BLIS overview
- Blind spot zone
- Rapidly approaching vehicle zone
The BLIS function is active at speeds above 10 km/h (6 mph).
The system is designed to react to:
- vehicles passing your vehicle
- vehicles that are rapidly approaching your vehicle from behind.
When BLIS detects a vehicle in zone 1 or a rapidly approaching vehicle in zone 2, an indicator light will illuminate in the right or left door mirror and glow steadily. If the driver then uses the turn signal on the side in which the warning has been given, the indicator light will become brighter and begin flashing.
If a passing vehicle’s speed is more than 15 km/h (9 mph) faster than your vehicle, BLIS will not react.
The light illuminates on the side of the vehicle where the system has detected the vehicle. If the vehicle is passed on both sides simultaneously, both lights come on.
- The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
- The driver is advised to read all sections in the Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
- Driver support functions are not a substitute for the driver’s attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
The function uses the vehicle’s camera and/or radar units, which have certain general limitations.
BLIS* limitations
Keep the marked area clean (on both the left and right sides of the vehicle).
Examples of limitations:
- Dirt, ice and snow covering the sensors may reduce functionality and prevent the system from providing warnings.
- The BLIS function is automatically deactivated if a trailer, bicycle holder or similar is connected to the vehicle’s electrical system.
- To help ensure BLIS can perform as intended, do not mount bicycle holders, luggage racks or similar to the vehicle’s towbar.
- BLIS does not work in sharp curves.
- BLIS does not work when the vehicle is being reversed.
The function uses the vehicle’s radar units, which have certain general limitations.
BLIS* messages
| Message | Meaning |
|---|---|
| Blind spot sensor Service required | The system is not functioning as intended. Contact Polestar Customer Support. |
| Blind spot system off Trailer attached | BLIS and Cross Traffic Alert* have been deactivated because a trailer has been connected to the vehicle’s electrical system. |
A text message can be erased by briefly pressing the 
button in the center of the right-side steering wheel keypad.
If a message cannot be erased, contact Polestar Customer Support